Sennheiser MKE-600 Shotgun Camcorder Microphone + XLR to 1/8" Connection Cable

Description

Sennheiser MKE-600 Shotgun Camcorder Microphone
+ Sennheiser KA600 Adapter Cable
Brand New in its Original Retail Box
The camera box
Authorized Dealer - Mfr # 505453 / UPC 615104223493
Here is what you get:
Sennheiser MKE 600 Shotgun Microphone
Sennheiser MZS 600 Shockmount for MKE 600 Microphone
Sennheiser MZW 600 Foam Windshield for MKE 600
Carrying Case
Limited 2-Year Warranty
In Addition
Sennheiser KA 600 - XLR Female to 1/8" TRS Male Connection Cable - 15" (40cm)
Limited 2-Year Warranty
Product Highlights
Resists Structure-Borne Noise
Selectable 100 Hz Low-Cut Filter
AA Battery or Phantom Powered
For Indie Films, TV & Documentaries
Very good suppression of structure-borne noise, Minimizes wind and handling noise
Phantom or battery powering, Battery switch with "Low Batt" indicator
Exceptional directivity, Maximum rejection of side noise, Switchable low-cut filter
For Camcorders and Video DSLRs, Flexible use on any camera due to compact form
Upgrade the audio quality in your video productions by switching from the built-in mic on your camera to the
Sennheiser MKE 600
battery- or phantom-powered shotgun microphone. Its focused directional characteristics and resistance to structure-borne noise offer sonic results well suited to a variety of production scenarios from independent films and web series to nature shows and documentaries.
The MKE 600's high sensitivity and low-noise circuitry unlock improved sound quality without extreme gain on noisy camera preamps. With a natural roll-off at 40 Hz and a selectable low-cut filter at 100 Hz, the MKE 600 can deliver clear intelligibility while attenuating low-frequency noise such as rumble. Plus, its frequency response incorporates a gentle rise in the treble to enhance speech clarity. The lightweight and durable metal housing ensure reliable toughness without weighing down your rig. The included shoe shock mount accommodates mounting the MKE 600 to a camera or tripod.
The 10" long MKE 600 uses an interference tube and a supercardioid/lobar polar pattern to provide pronounced directivity on-axis along with significant attenuation of sound entering at the sides and rear, making the MKE 600 far more effective at capturing distant sources than the omnidirectional mics found in most cameras.
The MKE 600 naturally reduces sub-bass frequencies below 40 Hz to prevent unnatural bass buildup. Activate the switchable low-cut filter at 100 Hz to roll off more low-frequency noise from common sources such as air conditioners and traffic.
Thanks to its 3-pin XLR output and compliance with 48 VDC phantom powering, the MKE 600 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.
When using devices that don't offer phantom power, the MKE 600 may be powered for up to 150 hours by a single AA battery (available separately). Approximately 8 hours of operating time remain once the low-battery indicator lights up red. Use the on/off switch to prevent unnecessary battery drain.
The MKE 600 includes a shoe shockmount for easy placement on your camera or a tripod. To mount the MKE 600 on a boompole or mic stand, use the Rycote InVision INV-HG mkIII shockmount (available separately), which will also impede the transfer of vibrations between your boompole/stand and the mic.
The MKE 600 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners by up to 25 dB. Enhanced attenuation of wind noise is possible with the addition of an optional windshield such as the Rycote 15cm Super-Softie, which also provides high immunity to rain.
For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider a complete windjammer, windshield, and shockmount suspension system such as the Rycote Super-Blimp NTG or the large Rycote Super-Shield Kit (both available separately).
Sennheiser MKE 600 Specs
Microphone
Form Factor
Stand/Boom Mount
Sound Field
Mono
Operating Principle
Line Gradient
Capsule
Condenser
Polar Pattern
Lobar, Supercardioid
Orientation
End Address
Circuitry
Solid-State
Pad
None
High-Pass Filter
100 Hz
Tone Adjustment
None
Indicators
Single LED (Power)
On-Board Controls
High-Pass Filter, On/Off
Windscreen
Foam (Included)
Performance
Frequency Range
40 Hz to 20 kHz
Maximum SPL
132 dB SPL (Phantom Power) 126 dB SPL (Battery Power)
Off-Axis Rejection
5 dB at 60° >15 dB at 120° >10 dB at 180°
Sensitivity
21 mV/Pa (Phantom Power) 19 mV/Pa (Battery Power)
Equivalent Noise Level
15 dB A-Weighted (Phantom Power) 16 dB A-Weighted (Battery Power)
Connectivity
Output Connectors (Analog)
1 x XLR 3-Pin
Power
Operating Voltage
48 V ± 4 V
Operating Current Consumption
4.4 mA (Phantom Power)
Battery Type
1 x AA
Approximate Battery Life
150 Hours
Physical
Color
Black
Mounting
Camera-Mount (with Included Hardware)
Construction Material
Metal
Operating Temperature
14 to 140°F / -10 to 60°C
Dimensions
ø: 0.79 x L: 10.08" / ø: 20 x L: 256 mm
Weight
4.52 oz / 128 g (Microphone)"
Packaging Info
Package Weight
1.005 lb
Box Dimensions (LxWxH)
13.6 x 5.6 x 3.45"
For International Shipping Cost: Please click on the 'Shipping and Payments' tab on the top of the page.
Sales Policy and Information
We offer Paypal, which is a fast and secure way of paying.
When paying with PayPal you may ship to whichever address you prefer.
We offer both Paypal and credit card payments.
Shipping Information
Most orders are shipped within 24 hours.
Standard shipping within the USA is shipped via UPS Ground, which is a secure and fast way of shipping.
We know you're anxious to get your purchase. Therefore, we offer UPS 3 Day Select and UPS Next Day Air Saver for a special low rate.
Orders shipped to PO Box addresses are shipped via USPS.
Orders shipped internationally will ship via USPS.
Attention Canadian and International Buyers:
Orders shipped internationally are shipped via USPS. UPS is available upon request.
We accept PayPal Payments from most international countries (wherever PayPal is accepted.)
On orders shipped outside the USA, there may be local customs charges. Buyers will be responsible for any and all customs fees and charges. Please check with your local authorities prior to purchase.
As per USA Regulations, we have to declare the full item amount when shipping overseas.