L.E. Wilson Standard Chamber Seater / Seating Die - 243 WINCHESTER BS24-WIN

Description

L. E. Wilson Chamber Type
Inline Seater Die
The LE Wilson Chamber Type Seater Die
is noted for precise accuracy.
Both the bull*et and case are firmly held in perfect alignment
as the bull*et is seated in the case.
Hand-die design for use with a mallet or an arbor press.
Not for use on a conventional press.
A favorite among benchrest shooters.
A chamber type
bull*et
seater positively controls
both
bull*et
and cartridge case alignment.
The case and
bull*et
are completely captured by the die prior to the
bull*et
being pushed straight into the case by a close-fitting seating stem.
This style of
bull*et
seater works more accurately
than a conventional (7/8"-14 TPI)
bull*et
seating die.
Seating depth adjustments are made by turning the screw inside the cap (3/8" - 24 TPI).
This is one of the most accurate
bull*et
seaters ever made.
Notes:
Die positively controls both
bull*et
and cartridge case alignment.
B
ull*et
is pushed into the case mouth by a close-fitting
bull*et
seating stem (drift).
This die works in an Arbor or hand press only.
L E Wilson also makes seating stems (their term "drifts")
for VLD ( Very Low Drag ) type bullets which drop in to these dies.