L.E. Wilson Stainless Steel Interchangeable Bushing Neck Die SND-X47L New!

Description

Stainless Neck Sizing Die
L.E. Wilson has been making precision reloading tools for over 80 years.
The L.E. Wilson Bushing Neck Sizer Die is the perfect die for the reloader
looking to squeeze every ounce of accuracy out of their handloads.
These dies are available in corrosion resistant,
long wearing Stainless Steel in most popular calibers.
Like the standard Bushing Neck Sizer Dies, they feature interchangeable bushings
to size the outside of the case neck to 3/16" from the case mouth.
This allows for total control as to the amount of neck sizing each case receives.
Simply change the bushing to increase or decrease the neck-tension on the bullet.
(Bushing sold separately.)
These are a hand-die design meaning that reloaders must use
an arbor press or a mallet to size each case.
These dies
will not work
on a conventional press using threaded dies.
It is recommended that these dies be used with the
Neck Die Decapping Base (sold separately).
Notes:
This neck die uses an interchangeable sizing bushing (Sold Separately)
that sizes the outside of the case neck
This die will accept Redding or Wilson Neck Size Bushings .
Die is used with either an arbor press or small mallet.
Die sizes the neck 3/16" from the mouth of the case.
PLEASE NOTE: This die does not have an expander ball.